11
ENGLISH
* After 8 to 13 hours (depending on ambient/water temperature), open the top cover and check that ice is stored in the water
tank.
5) Instruct the user on how to operate the unit.
6) Hand this instruction manual to the user.
9. SOLD OUT SENSOR SETTING (“U07”)
Choose among the four modes according to the type of beverage to dispense (e.g. beer, cocktail).
1) Lower the operation panel unit on the desired side.
2) Press and hold the set button on the operation panel to show “U01” on the display.
3) Use the foam button or liquid button to show “U07” on the display.
4) Press the set button to show the current number on the display. Use the foam button or liquid button to choose the desired
number (see table below). Press the set button to set the flashing number.
No.
Setting
0
Setting A (mainly beer)
1
Setting B (mainly cocktail)
2
Setting C (mainly cocktail)
3
Setting D (optional)
Note: The sold out sensor is factory set to “0: Setting A (mainly beer)”. The setting depends on the brand of beverage to
dispense. Check with your dealer/supplier.
5) Press the set button again to show “U07” on the display. Press and hold the set button for more than 3 seconds to complete
the setting.
Note: If no operation is performed for more than 1 minute, the dispensing mode is resumed. In that case, go back to step 2)
above.
10. USER SETTINGS
To make or change settings:
Press and hold the set button for 3 seconds to enter the setting mode (see “9. SOLD OUT SENSOR SETTING”).
To complete settings:
With “U_ _” on the display, press and hold the set button for 3 seconds to enter the dispensing mode.
The dispensing mode is also resumed if no operation is performed for more than 1 minute.
Item
Description
Default Setting Range
U01 Digital display
(in dispensing mode)
0: No indication
1: Number of mugs (*)
* Number switches between the larger and smaller mugs when the mug
setting is changed.
* To reset, press and hold the stop button for 3 seconds.
0
0 - 1
U02 Log of number of mugs
Log of number of mugs for each reset in descending order
* Log is indicated in turn for each keg replacement by “U04”.
* Log is indicated for both larger and smaller mugs when the mug setting is
changed.
* To reset all the current and past logs, press and hold the stop button for 3
seconds. This reset is not counted for “U04”.
0
Up to 5 logs
U03
Number of flush cycles
Number of flush cycles performed
* A flush cycle consists of liquid button operation (total 10 seconds) + foam
button operation (total 3 seconds) in the flush mode except when no
automatic dispensing action is made during the cycle.
* To reset, press and hold the stop button for 3 seconds.
0
0 - 9999
