25
ENGLISH
6) Use the accessory brush (S) to clean the two small holes in the beer tap.
7) Rinse the parts thoroughly with tap water.
8) Fit the valve shaft in the original (normal) direction while aligning the holes in the beer tap
and valve shaft (larger hole facing up), and tighten the cap nut.
Note: Assemble the beer tap correctly, or beer cannot be dispensed properly.
9) Hold the bottom of the operation panel unit and pull the front handle toward you to unlock. Pull down the operation panel unit
until it stops to cover up the beer tap lever.
7. KEG COUPLER (WEEKLY)
Follow the instructions provided by the beer company to clean the keg coupler.
8. EXTERIOR (WEEKLY)
The exterior is easily contaminated. Always keep it clean.
NOTICE
To prevent damage, do not use any cleaner other than a neutral cleaner on the plastic exterior.
1) Wipe with a cloth containing warm water and a neutral cleaner.
2) Use a damp cloth to wipe off any remaining cleaner.
9. AIR FILTER (BIWEEKLY)
NOTICE
Keep the air filter clean to ensure proper operation.
Do not operate the unit with the air filter removed. Dust may enter the unit resulting in failure.
IMPORTANT
The air filter must be cleaned as required by the installation condition.
1) Pull out the air filter.
2) Wash the air filter with cold water or warm water containing a neutral cleaner.
Note: Be careful not to damage the mesh.
3) Dry the air filter well in the shade.
4) Refit the air filter.
Keg Coupler
Rotary Type
Vertical Type
Keg Coupler
Brush (S)
Air Filter
