horsch SW 12000 SD Operating Instructions Manual Download

Page: 68 / 97

Optional equipment

Filling auger

With the hydraulic filling auger the hoppers can

be filled and also emptied, if required.

Hydraulic filling screw on seed wagon

A Filling auger
B Filling funnel
C Transport lock
D Slewing facility

The drive for the filling auger is integrated in the

hydraulic system for the fan. A three-way valve

allows switch between fan drive and filling auger.

Operation

DANGER

Danger of severe injury caused by the rotating

auger.

Never reach into the rotating auger!

WARNING

Danger of injury caused by swinging out ma-

chine parts.

Ask people to leave the danger zone before

swivelling the filling auger.

Open the desired hopper lid.

Open the swivel lock. Pull the bolt (A) outward

and turn the lever.

Unlocking the slewing facility

Pull the locking bolt (B) out of the tube lock,

hold the worm tube with one hand and open

the lock with the lever (C).

Opening the tube lock

Summary of Contents for SW 12000 SD


































































































Search results

Summary of Contents for SW 12000 SD

Reviews:

Related manuals for SW 12000 SD

Brands by name

Popular brands

horsch SW 12000 SD, Operating Instructions Manual

Search results

Summary of Contents for SW 12000 SD

Reviews:

Related manuals for SW 12000 SD

Brands by name

Popular brands