horsch SW 12000 SD Operating Instructions Manual Download

Page: 61 / 97

Joining of hoppers

The seed wagon SW 12000 SD enables the

placement of the same medium from both hop-

pers.

For this purpose open the flange connections

(1) of the pneumatic hoses on the metering

units.

Install the supplied hoses (2) between the

fall sluices and fasten the flange connections

again.

Adjust the valves on the air distribution hose

in such a way, that the two outermost outlets

are closed.

Pneumatic system conversion for hopper combination
1 Flange connections
2 Hoses for hopper combination

NOTE

Check all connections for leak tightness.
Leaks lead to sowing faults.

The desired seed quantity can be manually

distributed in the E-Manager to both metering

units. The “Hopper combination” function is

additionally available.

In this context pay attention to the operating

instructions for the E-Manager.

Summary of Contents for SW 12000 SD


































































































Search results

Summary of Contents for SW 12000 SD

Reviews:

Related manuals for SW 12000 SD

Brands by name

Popular brands

horsch SW 12000 SD, Operating Instructions Manual

Search results

Summary of Contents for SW 12000 SD

Reviews:

Related manuals for SW 12000 SD

Brands by name

Popular brands