¾
Loosen the screws (C) to be able to match the
height of pulling lug or ball head.
¾
After adjusting the correct height fasten
screws C again.
Connecting/Parking
DANGER
Serious accidents when manoeuvring and cou-
pling!
¾
Keep an eye on your environment.
¾
Keep persons (children) out of the manoeu-
vring range of the machine.
¾
Instruct persons to leave the area between
tractor and machine.
¾
No person must be present in the danger zone
when the tractor approaches the machine or
moves away from it!
¾
Trigger movements of the three-point power
jack only from outside the danger zone.
WARNING
Leaking hydraulic fluid can cause serious in
-
juries! Danger of injury by unwanted machine
movements.
¾
Connect and disconnect the hydraulic lines
only when the hydraulics are without pressure
on both tractor and machine.
Connecting
The machine must be properly connected to a
tractor before any machine movements.
DANGER
Serious accidents from loss of stability!
Machines with pneumatic brake:
¾
Do not move the machine without a brake
line connected.
¾
When connecting always connect the
yellow
connection (brake line) first.
NOTE
¾
Check all plug-and-socket connections
(hydraulic, electric and pneumatic) for
cleanliness and firm seating.
Dirty connectors will contaminate the flowing
media. The connectors therefore become
worn and this results in malfunctions and
failures in the connected assembly groups.
¾
Back the tractor up to the seed wagon.
¾
Connect the drill controls.
¾
Connect all hydraulic connections.
¾
Connect the lighting system.
¾
Connect the brake lines.
¾
Swing the support to transport position.
Hitching up the NT-version
Before hitching up a Sprinter/Pronto NT, one
must adjust then height of the connection at the
rear end of the seed wagon.
¾
For this purpose loosen four screws (A) and
adjust the hitching height with screw (B), so
that the drill is horizontally aligned.
¾
Retighten the screws (A) again.
A
B
Adjustment of the NT-version seed wagon hitching
A Fastening screws
B Setscrew
34
35
