Horizon Reverse Osmosis Seafari Versatile Series, Owner'S Manual

Page: 17 / 209

Seafari Versatile 450 - 1800
Page 1-2
1
through the Brine Discharge Connector and diverted
back to the feed source.
Product Water
: The product water flows out of
the R.O. Membrane and passes into a Salinity
Probe which adjusts automatically for temperature
changes and registers, electronically, the salt content
of the product water. Next, the Product Flow
Meter registers the amount of potable water being
produced. The product water then proceeds into
the 3-Way Solenoid Diversion Valve. Here, potable
water is diverted to the Charcoal Filter where
gasses or odors present are absorbed and removed
from the product water. The final filtration process
occurs in the Ultraviolet Sterilizer where 99.9% of all
microorganisms, including viruses and bacteria,
are destroyed.
Rinsing and Cleaning
: The 3-way valves are
provided for System Rinsing and Cleaning.
The Automatic Fresh Water Flush System
maintains fresh water within the System during
shut down periods.
Electronics
: All electrical connections terminate at the
Salinity Controller. Highly advanced, the Salinity
Controller features computer controlled reliable
solid state electronics with advanced proprietary
logic features found in no other desalination system.
Various Remote Control units are available for
remote operation of the System.
The HRO Solution
A manmade process, Reverse Osmosis, overcomes
this natural phenomenon. By forcing sea or
brackish water (under high pressure) through a
semipermeable membrane, potable water can be
realized. Reverse Osmosis Desalination Systems by
HROSystems make possible the once impossible,
potable water from undrinkable water sources.
Low Pressure
: Feed Water (Salt Water or Brackish
Water) enters the system through an Inlet Valve
and is then filtered by a raw water Sea Strainer.
The pressure of the Feed water is increased by
the Booster Pump and filtered several more times
through standard and optional prefiltration units
including Media Filter,
Plankton Filter, Prefilter and
Oil Water Separator.
High Pressure
: The Stainless
Steel High Pressure Pump
then increases the filtered
feed water to a high
pressure level and forces
it into the Reinforced
Fiberglass Membrane
Vessel Assembly. The Back
Pressure Regulator controls
and automatically maintains
the necessary high pressure
level in the membrane.
Concentrated brine enters
the Brine Water Flow Meter
which allows observation
of the condition of the High
Pressure Pump. The Brine
Water is then discharged