Horizon Reverse Osmosis Seafari Versatile Series, Owner'S Manual

Page: 16 / 209

Seafari Versatile 450 - 1800
Page 1-1
1
1.5 SAFETY NOTES
Safety issues that require users attention are
highlight through out this manual as follows.
CAUTION : A Caution note provides
important information users must know
to prevent the possibility of damaging the
device or equipment and to prevent the
possibility of injuries and/or death.
NOTE
: A Note provides additional
information users should know
to properly and safely operate the
equipment.
1.6 GRAPHICS
Graphics used are for reference and illustration
purposes only, and may not represent the actual part
or arrangement of parts in a customized system.
1.7 THE REVERSE OSMOSIS PROCESS
The Obstacle
: Osmosis is the naturally occurring
diffusion of two miscible (mixable) solutions through
a semipermeable membrane in such a manner as
to equalize their concentration by allowing a lessor
concentration, potable water, to naturally diffuse
through a semipermeable membrane into a higher
concentration, sea or brackish water.
Sea / brackish water is a high concentration solution.
Potable water is a low concentration solution.
Therefore, sea water or brackish water cannot
naturally diffuse through a semipermeable
membrane to provide potable, or drinking water.
1 INTRODUCTION
1.1 PURPOSE
This manual is intended for HRO System’s system
technicians, technical support, and training
personnel. This manual contains technical
information and instructions for the installation,
operation, maintenance, and troubleshooting of the
HRO System’s Desalination Product.
1.2 SAFETY IN GENERAL
Anyone responsible for the installation, operation,
and maintenance of the HRO Desalination System
must read this manual thoroughly and comply with
the instructions, guidelines, and safety requirements
at all times.
1.3 USING THIS MANUAL
Reading this manual in its entirety will help users
to become familiar with each component within the
system. By understanding the function, importance,
and normal operation of each component, users can
readily operate and diagnose problems.
Aside from this section, this manual is divided into
majors sections.
• Section 2: System Specifications
• Section 3:
• Section 4: System Schematic and Component
Descriptions
• Section 5: System Installation
• Section 6: Commissioning
• Section 7: Start-up Procedure
• Section 8: Shutdown Procedure
• Section 9: Troubleshooting Guide
• Section 10: Storage and Cleaning
• Section 11: Maintenance & Repair
• Section 12: Exploded Parts View
• Section 13: Electrical Diagrams
• Section 14: Conversion Charts
Each section should be reviewed in the order
provided before performing any system operations.
1.4 TERM USED
The term System refers to the Seafari System in
general and will be used throughout this manual.