horiba F-74BW, Instruction Manual

Page: 35 / 132

Chapter 3 Basic Operation
3.2 Settings
F-74BW 23
3.2.6 ION Unit Setting
Select the unit of ion measurement between g/L and
mol/L.
If you use different unit settings between calibration and
measurement, you can not obtain correct measurement
results. When you change the unit setting, perform
calibration again.
This setting is possible only for CH1.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the ion unit set-
ting screen.
2.
Press the ENTER key to enter the ion unit change
screen.
3.
Select the unit to g/L or mol/L, and press the
ENTER key.