horiba F-74BW, Instruction Manual

Page: 34 / 132

Chapter 3 Basic Operation
3.2 Settings
22 HORIBA
3.2.5 Sample ID Setting
If a sample ID is set here, it is recorded together with the
measurement data at the data memory and it allows you
to search data easily.
This setting applies for both of CH1 and CH2.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the sample ID
setting screen.
2.
Press the ENTER key to enter the sample ID
change screen.
3.
Press the or key to select digit and press the
▲
or
▼
key to change value, and press the ENTER
key.
Setting range: 0 to 9999
▲ ▼