6 Other Functions
53
3.
Press the button to be set.
Pressing each button allows the corresponding operations as follows:
4.
Change the setting in each setting screen, and press [SET] key.
The setting is changed and the screen returns to the KEY LOCK screen .
5.
Press the [EXIT] key in the KEY LOCK screen.
The screen returns to the MEAS. screen.
Q
KEY LOCK
Press the [KEY LOCK] button. The system is allowed to be KEY LOCK state immediately.
Q
KEY UNLOCK
Press the [KEY UNLOCK] button. The PASSWORD screen appears.
Fig. 50 PASSWORD screen
Input the password currently set.
Pressing each key allows the corresponding operation as follows:
Note
The password at shipment is set to “0000.”
KEY LOCK
Enables KEY LOCK ON.
KEY UNLOCK
Disables KEY LOCK.
The PASSWORD screen (page 53 Fig. 50) appears.
SUPERVISOR MODE
A button exclusively for service use.
Operators cannot operate the button.
CANCEL Returns to the KEY LOCK screen without changing the setting.
CLEAR
The value input to the editing area is cleared.
BACK
The last digit input is cleared.
SET
When the input password is correct, the key lock state is released and the screen
returns to the previous one. When the password is incorrect, a message “WRONG
PASSWORD” appears and the screen returns to the KEYLOCK screen.
