4
For models equipped with floor polisher*:
1.
If needed, the Floor Polisher can to be attached underneath the Carpet and Floor
nozzle.
[3]
2.
The floor polisher is ideal to polish hard floor, marble and wooden floor.
For models equipped with electric power nozzle*:
The electric power nozzle has to be secured to the product neck as per the carpet and
floor nozzle
[4a]
, but the electrical connection must be inserted to Electric power nozzle
socket.
[4b]
For models equipped with Grand Turbo Nozzle*:
Secure the nozzle to the product in the same way as the carpet and floor nozzle. Use the
turbo nozzle for deep cleaning on carpets.
For models equipped with mini-turbo nozzle*:
Ideal to clean soft furnishings and for the pet hairs removal.
1. The mini-turbo nozzle can be connected directly to the flexitube handle or the lance.
[5a]
2. If any blockages are encountered, please open the inspection cover on the
underside.
[5b]
Cord storage:
To store the cord after cleaning wrap the cord around the two cord hooks.
[6]
USING YOUR CLEANER
Power switch:
1.
To switch the cleaner on, rotate the power control knob on the handle.
[7]
2. To switch off the product, rotate the same knob.
Cleaner lock release:
To start cleaning, unlock the cleaner by pressing with your foot the locking pedal on the
nozzle.
[8]
Using the flexi tube with accessories:
The flexi tube gives you the maximum flexibility of usage. it can be used alone or combined
with the accessories, as desired. To vacuum with the supplied accessories:
1.
Select accessory mode by rotating the carry handle/accessory mode activator to
accessory position until locked in position.
[9]
2.
Remove the flexi tube from the location in the back of the cleaner handle.
[10]
3.
To use the extension tube: remove the tube from the door by unclipping from the
top.
[11]
Attach to the flexitube.
[12a]
4. To use the dusting brush: remove the tool from the location in the body of the
product by pressing the middle of the component
[13a]
then unclipping from the top.
[13b]
Attach to the flexitube.
[12b]
5. To return to floor vacuuming push the floor mode button.
[14]
IMPORTANT -
When using cleaning tools, the cleaner must be kept in the upright
position, and held. It must not be used in the stand alone position without the user holding
the product.
[15]
CLEANER MAINTENANCE
Replacing the disposable bag
1. Lay the cleaner on a flat surface, pull back the door release button and remove the
bag door.
[16]
2.
Remove the disposable bag, close the flap to lock the contents and dispose.
[17]
3. Take a new bag and fit the collar with the location in the main body and rotate until
fixed.
[18]
4. Locate tabs on door as shown and close door.
Attention: this product is fitted with a mechanism that prevents the door closing when
there is no bag fitted.
Note: the bag may need changed frequently when picking up material such as powder or
fine dust or when cleaning new carpets.
Cleaning the washable pre-motor filter
1. Lay the cleaner on a flat surface, pull back the door release button and remove the
bag door.
[16]
2.
Remove the old pre motor filter by pressing the finger tab to release.
[19]
3. Gently tap the filter against the side of a bin to release excess dust.
[20]
4.
If deeper cleaning is required: Wash the filter thoroughly under hand warm water
until the water runs clean.
[21]
5.
Remove excess water by shaking and leave to dry for 24 hours. DO NOT USE HOT
WATER OR DETERGENTS.
[22]
6.
Refit bag door as above.
IMPORTANT -
For optimum performance, shake off excess dust from the filters regularly.
We recommend that the filter is washed every 3 months.
Note: Do not use the cleaner without filters assembled.
(*Certain models only)
GB
48003172- Diva IM MULTI.indd 4
15/11/2010 00:09:19
