39
When the audio type is microphone, users can enable the record function to record during
the broadcast by microphone.
Rep. interval is the interval time of repeats of the playlist, the range is from 0 to 3600s.
The task will not be stopped within the interval time.
Song interval is the interval time between two audio files, the range is from 0 to 3600s.
The task will not be stopped within the interval time.
Target is used to select the desired zones for the task. Click the checkbox can select or click the
icon
to select all, the icon
is to cancel all.
The item of dry contact outputs is used to select the dry contact output which need to be activated
by the task. Click the checkbox can select or click the icon
to select all, the icon
is to
cancel all. If the checkbox of “Match speaker lines” is enabled, the dry contact outputs will be
activated with following speaker lines. For example, dry contact output 1 will be activated when
zone 1 is broadcasting. This function can be used to control the volume controllers on each
speaker lines. Here the dry contact output means the zone related output during the broadcast, it
cannot control the contact outputs of other device without broadcasting.
There
is an “Extend” at the left bottom, which can set some additional attributes used for the third
system integration.
Users can click
“Description” and add some description for the task, which will be displayed in X-
NPMS.
After
setting, click “OK” to save.
Operation Settings
Operation settings are used to set following contents:
Key function, trigger mode and content.
Set the name, function, and trigger mode and content of one-click button of X-NPMS.
Set manually broadcast function.
Category, voice segments of speech synthesis.
Users and permission.
1
．
Physical Keys
All equipped extend key modules, such as X-K4 or X-K8 will be displayed in key list. Users can
double click the item or click
at the option to set function and trigger mode.
Task broadcast, volume control, speaker line, group and close zones can be specified to a key.
The default function is none. Two trigger modes can be chosen for task broadcast, such as press
and toggle. Only toggle option can be selected for other functions.
Speaker Line
It is used to select target zone to conduct full broadcast. Users need to set zones if speaker line is
selected for function. Enable the front check box to set zones.
