Honeywell X-618 Commissioning Manual Download Page 11 | Manualshive

Page: 11 / 57

background image

10



Tools

The Tools menu provides some special operations, such as

:” Browse Recorded Files in

DCS”,” Browse Recorded Files in X-NPMS”, “Export Device List”, “Upload Project File from
DCS to PC”, “Virtual Console”, “Browse log in X-DCS3000”, “Browse log in X-NPMS”,
“Upgrade DCS/NRI/X-NPMS Firmware” and “Select Language” etc.



Help

The Help menu of the X-618 Config software provides the software version information and
the help information for the operation of the software.

Navigation Buttons

For making system configuration convenient, there are 4 navigation buttons in the top of the view,
so the users can find the specific setting subjects quickly.



Device

The Device button leads to set the basic function parameters of the devices. The setting items
which depend on the device type mainly include: Properties, Time, Supervision and so on.



Task

Click the Task button to set broadcast task. The users can set the various broadcast
operations as the X-618 system needed. Mainly include: Play List, Task and Task Serial.



Operation

Click the Operation button to set the various operation functions, such as the keys and the
appointed tasks for them, contact input, timing.



Download

Click the Download button to verify that configurations are correct or not. If errors are found,
an error list will be shown. If all the configurations are correct, it will enter the configuration
download window.

«
...
9
10
11
12
13
...
»

Summary of Contents for X-618


























































Reviews:

No comments

Related manuals for X-618

Brand: NAD Pages: 7

Brand: NAD Pages: 3

Brand: Takstar Pages: 2

Brand: Velleman Pages: 29

Brand: D.W. Fearn Pages: 21

Brand: Adcom Pages: 12

Brand: Glensound Pages: 15

Brand: Fender Pages: 9

Brand: D'Amore Engineering Pages: 16

Brand: GLEMM Pages: 12

Subwoofer Gadget

Brand: Natural Bass Technology Pages: 2

Brand: Mirage Pages: 10

Brand: McIntosh Pages: 22

Brand: YBA DESIGN Pages: 16

Brand: Redback Pages: 4

THUNDERBASS BT-350

Brand: Crate Pages: 12

Brand: SoundDigital Pages: 14

ALPIN 100 MK III

Brand: REIMESCH KOMMUNIKATIONSSYSTEME GMBH Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands