Honeywell VISTA, User Manual, Page: 30 / 36

– 30 –
Water Valve Opened or Closed
•
Current Part
.
Icon
: This is a reminder that email messages are based on actions
occurring only in the partition to which the VAM is assigned.
1. Click Setup then select Email .
2. Click the User SMTP button to assign the user’s email server
information. This establishes the email server domain (the “from”
address).
a. Select the email server name (email provider). Choose from GMAIL,
OUTLOOK, YAHOO, or Add New.
b. Enter the email ID (user name) and password for the email server.
c. The Email Server and SMTP port number fields are automatically filled
unless “Add new” was selected.
If Add new email server was selected, enter the appropriate SMTP and
port number information (see your email provider for details).
d. Click Save .
3. Click Event 1 to define the event types and conditions that will trigger
notifications to the chosen email address(es).
4. Enter up to four email address(es) to which Event 1 will send
notifications.
5. Click Save .
6. Repeat steps 3 -5 for Events 2-4 if desired.
NOTES
: If sending the e-mail fails an e-mail sent failure notification icon will
display on the “User SMTP” button in “Email Setup.” Verify you SMTP
server settings and make sure there are no security protocols that need
to be adjusted through your email providers setup options.
Local/Remote Access Log In Setup (Account Setup)
Local/Remote access lets the user access VAM’s menus directly via the
Internet when away from home. The home router must first be configured for
port forwarding. Refer to the router’s instructions for details on port
forwarding.
You can assign up to five user logins.
To set up a remote access log in, do the following:
1. Click Setup > Account .
2. Enter the desired user name and password.
Passwords must be a minimum of 8 alphanumeric characters, and must
include at least one uppercase letter, one lowercase letter, and one number.