– 24 –
3. The screen displays the exit delay countdown. When exit delay expires, the
screen displays "Armed."
Arming Multiple Partitions
NOTES
:
•
Some systems may not have multiple partitions. In addition, your code
must be authorized to arm multiple partitions.
•
Mobile view cannot be used to arm multiple partitions. Mobile view can
control only the partition VAM was assigned to when installed.
1. From the “Home” screen, select
Security
and then select
Arm Multi-
Partition
.
2. Choose the desired arming mode.
3. Enter the user code authorized to access other partition(s).
4. Select the partition from the list on the screen, and press
OK
.
5. If desired, select
ALL
to arm all partitions listed.
Steps to Disarm the System
IMPORTANT:
If you return to your home or business and the main
burglary sounder is on, DO NOT enter the premises, but call the police
from a nearby safe location. If you return to your home or business after
an alarm has occurred and the main sounder has shut itself off, the
keypad beeps rapidly upon entering, indicating that an alarm has
occurred during your absence.
LEAVE IMMEDIATELY and
CONTACT THE POLICE
from a nearby safe location.
If armed in AWAY mode:
1. When you enter the premises, the Entry Delay Active message appears.
2. Enter your 4-digit user code. The system disarms.
If armed in STAY or NIGHT mode:
1. Select the
Disarm
button.
2. Enter your 4-digit user code. The system disarms.
Steps to Disarm Multi-Partitions
1. Select
Security
.
2. Choose
Arm Multi-Partition
.
3. Click the
Disarm
button.
4. Enter your 4-digit user code.
5. Highlight the partition(s) to disarm and press
OK
, or press
ALL
to disarm
all partitions.