– 26 –
5. Click the
BACK
button to return to the “Arming” screen, and then arm
the system in the desired arming mode.
How to Clear Bypassed Zones
For some control panels, a bypassed zone is automatically unbypassed when
you disarm the system. Ask your installer if this is active for your system.
You can also manually remove the bypass as follows:
1. Click the
SHOW ZONES
button.
2. Click the
CLEAR
button.
3. Enter your 4-digit user code. The system should now be Ready to Arm.
NOTE
: If the system is armed and you unbypass a zone, it disarms the
system. If zones are still faulted (not ready) the system will indicate the
status as “Not Ready Fault”.
Console Emulation Mode
Console Emulation Mode allows you to use the web browser as a keypad
interface just as you would a regular system keypad. All commands shown in
Console Emulation mode can be performed from a standard alpha keypad.
NOTES:
•
It is recommended that you
do not
use Console Emulation Mode to enter
GOTO commands, because unsatisfactory operation may result.
•
2-button panic keys (1 & *, 3 & #, and * & #)
do not
function in the
Console Emulation Mode. The A, B, C, and D buttons do function if
programmed as panic keys. Check with your system installer for details.
How to Enter Console Emulation Mode
To start Console Emulation Mode, do the following:
1. From the Home screen, press the
SECURITY
button.
2. Press the
CONSOLE MODE
button.
3. Perform functions as you would from a standard alpha keypad.
Using Total Connect with VAM (Remote Services)
The VISTA Automation Module supports Remote Services for controlling Z-
Wave devices and scenes remotely from an associated Total Connect account.
Ask your installer if a Total Connect account has been set up for you.
The following describes the related features:
•
VAM can be controlled from a smart phone, iPad
®
, Android
TM
Tablet,
Blackberry
®
or PC using Total Connect and includes webpage support for
iOS6 and Google-TV