Honeywell THOR VM1, Reference Manual, Page: 82 / 324

Thor VM1 OS Upgrade
Introduction
Depending on the size of the operating system, the total time required for a successful upgrade may require several minutes.
The OS upgrade files are unique to your Thor VM1's physical configuration and date of manufacture. OS upgrade files designed
for one device configuration should not be used on a different device configuration.
When upgrading the OS on a Thor VM1 with a 12-key keyboard, perform the upgrade using either Wavelink Avalanche or an
external USB keyboard.
Preparation
l
Contact your representative to get the OS upgrade files .
l
Use ActiveSync to back up Thor VM1 user files and store them elsewhere before beginning an upgrade on the Thor
VM1.
l
Maintain an uninterrupted AC/DC power source to the Thor VM1 throughout this process.
l
The CF card with the OS and systems files must be present for the Thor VM1 to boot. Removal or installation of SD or
CF cards should be performed on a clean, well-lit surface.
l
Always perform OS updates when the Thor VM1 has a dependable external power source connected to the Thor VM1.
Procedure
1. Verify a dependable power source is applied to the Thor VM1 and will stay connected during the upgrade procedure.
2. Warmboot the Thor VM1 before beginning the update process.
3. Establish an ActiveSync connection between the Thor VM1 and a desktop/laptop computer.
4. Download the OS files from the desktop/laptop to the Thor VM1's System folder.
5. During the file copy process to the Thor VM1 System folder, when asked “Overwrite ?”, select Yes to All.
6. Review the files that were downloaded to the System folder.
7. Restart the Thor VM1.
8. Disconnect from ActiveSync.
9. When the OS finishes loading, check the OS update version by selecting Start > Settings > Control Panel > About >
Software tab.
The touch screen may require calibration, however most Windows OS versions save the calibration data eliminating the need
to calibrate.
Contact your representative for re-imaging options if the Thor VM1 won't boot up after the upgrade is finished.
3-20