Honeywell THOR VM1, Reference Manual, Page: 111 / 324

Message Explanation and/or corrective action Level
Exit AppLock-
EnumWindows-Not
found
There are two exit paths from the enumeration function. This message denotes the enu-
meration function did not find the application. LOG_PROC-
ESSING
Exit DecryptPwd Exiting password decryption processing.
LOG_PROC-
ESSING
Exit EncryptPwd Exiting password encryption processing.
LOG_PROC-
ESSING
Exit FullScreenMode Exiting the function that switches the screen to full screen.
LOG_PROC-
ESSING
Exit GetAppInfo
Processing is at the end of the function that retrieved the application information from the
registry. LOG_PROC-
ESSING
Exit password dialog Exiting password prompt processing.
LOG_PROC-
ESSING
Exit password dialog-can-
cel
Exiting password prompt w/cancel.
LOG_PROC-
ESSING
Exit password dialog-OK Exiting password prompt successfully.
LOG_PROC-
ESSING
Exit password timeout Exiting password timeout processing.
LOG_PROC-
ESSING
Exit restart app timer Processing is at the end of the timer function
LOG_PROC-
ESSING
Exit TaskbarScreenMode Exiting the function that switches the screen mode back to normal operation for the admin-
istrator.
LOG_PROC-
ESSING
Exit ToAdmin Exiting the function that handles the mode switch into admin mode.
LOG_PROC-
ESSING
Exit ToUser Exiting the user mode switch function.
LOG_PROC-
ESSING
Exit ToUser-Registry
read failure
The AppName value does not exist in the registry so user mode cannot be entered.
LOG_PROC-
ESSING
Exit verify password-no
pwd set
Exiting password verification.
LOG_PROC-
ESSING
Exit verify password-
response from dialog
Exiting password verification.
LOG_PROC-
ESSING
Found taskbar The handle to the taskbar has been found so that AppLock can disable it in user mode.
LOG_PROC-
ESSING
Getting address of key-
board hook init pro-
cedure
AppLock is retrieving the address of the keyboard hook.
LOG_PROC-
ESSING
Getting configuration
from registry
The AppLock configuration is being read from the registry. This occurs at initialization and
also at entry into user mode. The registry must be re-read at entry into user mode in case
the administration changed the settings of the application being controlled.
LOG_PROC-
ESSING
Getting encrypt pwd
length
The length of the encrypted password is being calculated. LOG_EX
Hook wndproc failure
AppLock is unable to lock the application. This could happen if the application being
locked encountered an error after performing its initialization and shut itself down prior to
being locked by AppLock.
LOG_ERROR
3-49