Honeywell THOR VM1 Reference Manual Download Page 164

Page: 164 / 324

Date / Time

Start > Settings > Control Panel > Date/Time - or - Time in Desktop Taskbar

Use this Thor VM1 panel to set Date, Time, Time Zone, and assign a Daylight Savings location.

Factory Default Settings

Current Time

Midnight

Time Zone

GMT-05:00

Daylight Savings

Enabled

There is very little functional change from general desktop or laptop Date/Time Properties options.

Double-tapping the time displayed in the Desktop Taskbar causes the Date/Time Properties screen to appear.

The Sync button (if available) activates a utility that will set the clock using a network time server.

3-102

Summary of Contents for THOR VM1





































































































































































































































































































































Search results

Summary of Contents for THOR VM1

Reviews:

Honeywell THOR VM1, Reference Manual, Page: 164 / 324

Search results

Summary of Contents for THOR VM1

Reviews: