Honeywell THOR VM1, Reference Manual, Page: 21 / 324

Bluetooth LXEZ Pairing
The Thor VM1 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over the air. Bluetooth device
connection (or pairing) can occur at distances up to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless
connectivity while Bluetooth is active.
The user cannot select PIN authentication or encryption on connections from the Thor VM1. However, the Thor VM1 supports
authentication requests from pairing devices. If a pairing device requests authentication or encryption, the Thor VM1 displays a
prompt for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the length of the user’s passcode.
Bluetooth simultaneously supports one printer as a slave Bluetooth device and one scanner, either as a slave or as a master
Bluetooth device.
l
The LED on the Bluetooth scanner illuminates during a scanning operation.
l
Bar code data captured by the Bluetooth scanner is manipulated by the settings in the Thor VM1 Scanner Properties
control panel applet.
l
Multiple beeps may be heard during a bar code scan using a mobile Bluetooth scanner; beeps from the mobile Bluetooth
scanner as the bar code data is accepted/rejected, and other beeps from the Thor VM1 during final bar code data
manipulation.
WWAN
WWAN (Wireless Wide Area Networking) is available on the Thor VM1. A slot is provided for a SIM card.
GPS
GPS (Global Positioning System) is available on the Thor VM1.
2-3