Honeywell THOR VM1 Reference Manual Download Page 310

Page: 310 / 324

Quick Mount Smart Dock

Note:

The RAM ball is not included in the following measurements.

Length

7.1” (18.0 cm)

Width

6.1” (15.5 cm)

Height

2.5” (6.4 cm)

Weight

3.2 lb. (1.2 kg)

Environmental Specifications

Thor VM1

Operating Temperature

Standard: -4°F to 122°F (-20°C to 50°C) [non-condensing]
Extended temperature: -22º to 122º F (-30ºC to 50ºC) [condensing]

Storage Temperature

Standard and Extended temperature: -22°F to 140°F (-30°C to 60°C) [non-condensing]

ESD

8 KV air, 4kV direct contact

Operating Humidity

Standard: Up to 90% non-condensing at 104°F (40°C)
Extended temperature: 100%

Water and Dust

IEC 60529 compliant to IP66

ESD

15 kV

Vibration

MIL-STD-810F, composite wheeled vehicles.

Crash

SAE-J 1455

7-2

Summary of Contents for THOR VM1





































































































































































































































































































































Search results

Summary of Contents for THOR VM1

Reviews:

Honeywell THOR VM1, Reference Manual, Page: 310 / 324

Search results

Summary of Contents for THOR VM1

Reviews: