Honeywell THOR VM1, Reference Manual, Page: 112 / 324

Message Explanation and/or corrective action Level
Hook wndproc of open
app failure
The application is open, but AppLock cannot lock it. LOG_ERROR
Hot key event creation
failure
The Admin applet is unable to create the hotkey notification. LOG_ERROR
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key set event failure
When the administrator changes the hotkey configuration the hotkey controller must be
notified. This notification failed.
LOG_ERROR
Hotkey press message
received
The user just pressed the configured hotkey.
LOG_PROC-
ESSING
In app hook:WM_SIZE
In addition to preventing the locked application from exiting, AppLock must also prevent
the application from enabling the taskbar and resizing the application’s window. This mes-
sage traps a change in the window size and corrects it.
LOG_EX
In app hook:WM_WIN-
DOWPOSCHANGED
In addition to preventing the locked application from exiting, AppLock must also prevent
the application from enabling the taskbar and resizing the application’s window. This mes-
sage traps a change in the window position and corrects it.
LOG_EX
Initializing keyboard
hook procedure
AppLock is calling the keyboard hook initialization.
LOG_PROC-
ESSING
Keyboard hook initial-
ization failure
The keyboard filter initialization failed. LOG_ERROR
Keyboard hook loaded
OK
The keyboard hook dll exists and loaded successfully. LOG_EX
L after Ctrl Processing the backdoor entry. LOG_EX
Loading keyboard hook
When AppLock first loads, it loads a dll that contains the keyboard hook processing. This
message is logged prior to the load attempt. LOG_PROC-
ESSING
Open failure
The status information is being saved to a file and the file open has failed. This could
occur if the file is write protected. If the file does not exist, it is created.
LOG_ERROR
Open registry failure
If the Administration registry key does not exist, the switch to user mode fails because the
AppName value in the Administration key is not available.
LOG_ERROR
Opened status file The status information is being saved to a file and the file has been opened successfully. LOG_EX
Out of memory for
encrypted pwd
Not enough memory to encrypt the password. LOG_ERROR
pRealTaskbarWndProc
already set
The taskbar control has already been installed. LOG_EX
Pwd cancelled or invalid-
remain in user mode The password prompt was cancelled by the user or the maximum number of failed
attempts to enter a password was exceeded.
LOG_EX
Read registry error-hot
key The hotkey registry entry is missing or empty. This is not considered an error. The key-
board hook uses an embedded default if the value is not set in the registry.
LOG_ERROR
Read registry failure-app
name AppName registry value does not exist or is empty. This constitutes a failure for switching
into user mode.
LOG_ERROR
Read registry failure-
Cmd Line AppCommandLine registry entry is missing or empty. This is not considered an error
since command line information is not necessary to launch and lock the application.
LOG_ERROR
Read registry failure-Inter-
net The Internet registry entry is missing or empty. This is not considered an error since the
Internet value is not necessary to launch and lock the application.
LOG_ERROR
3-50