ControlNet Fiber Media
Installing ControlNet Repeater Adapter
8
Experion PKS ControlNet Fiber Optic Implemenation Guide
R210
Honeywell
10/04
Installing ControlNet Repeater Adapter
Front View
BNC Connector
(Remove cover
before connection)
Terminals for
Power Supply
DIN Rail
Locking Tab
Cover for
Bus Connector
Fiber Channels
Status
Coax
Status
ControlNet
Repeater
TM
Adapter
TC-RPA001
+V
COM
MODULE
STATUS
I
N
Figure 2 Front view ControlNet Repeater Adapter model TC-RPA002.
Mounting on a DIN rail
ATTENTION
•
You are responsible for obtaining and mounting the 35 x 7.5 mm
metal, top hat rails (DIN EN50022) to be used for mounting the
Repeater Adapter.
•
The Repeater Adapter supports non-redundant ControlNet media
communications. For redundant ControlNet media support, a
second Repeater Adapter is required.
•
Be sure you install the ControlNet Repeater Adapter at the left end
of a Repeater Adapter and Fiber Module hub.
