manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 4 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 4

ii

PX4ie and PX6ie High Performance Printer User Guide

Chapter 2 - Set Up The Printer..................................................................... 11

About the Media ...........................................................................................................................11

Loading Media for Tear-Off Printing.............................................................................11

Loading Media for Peel-Off Printing.............................................................................17

Loading Media for Cut-Off Printing ..............................................................................25

Loading Media for Internal Batch Takeup Printing .................................................33

Loading Media for Printing From an External Supply............................................41

About the Ribbon .........................................................................................................................43

Load Ribbon ............................................................................................................................43

Connect the Printer to Power ..................................................................................................50

About Smart Calibration.....................................................................................................50

Print a Test Label .........................................................................................................................51

How to Create and Print Labels .............................................................................................51

Printing on RFID Media.............................................................................................................51

.............................................................................................................................................................52

Chapter 3 - Connect the Printer .................................................................. 53

Connect the Printer to Your PC ..............................................................................................53

Connect the Printer Using a Serial Cable ....................................................................53

Connect the Printer Using a USB Cable.......................................................................53

Connect the Printer to Your Network ...................................................................................53

Connect the Printer to an Ethernet Network..............................................................54

Printer Drivers ...............................................................................................................................54

Install Printer Drivers...........................................................................................................55

Install Authentication Certificates .................................................................................55

USB Host Port ...............................................................................................................................56

Connect a USB Device.........................................................................................................56

Chapter 4 - Configure the Printer ............................................................... 57

Printer Configuration Menus ..................................................................................................57

Printing Menu.........................................................................................................................58

System Settings Menu ........................................................................................................58

Alert Menu................................................................................................................................58

Printer Configuration...........................................................................................................59

Summary of Contents for PX4ie













































































































Reviews:

No comments