Honeywell PX4ie User Manual Download Page 66 | Manualshive

Page: 66 / 108

Honeywell PX4ie User Manual Download Page 66

56

PX4ie and PX6ie High Performance Printer User Guide

10. Use the printer web page, the Main Menu on a full touch printer, or Honeywell

PrintSet 5 to specify the certificate .pem file to use for security.

USB Host Port

Use the USB host interface port on the printer to connect these peripheral devices:

You can also connect a peripheral device through the USB-to-Serial or USB-to-
Parallel adapter cable accessories. Contact your local sales representative for
information.

Connect a USB Device

A USB storage device can be inserted into the USB host port on the back of the
printer.

1.

If you are connecting a USB storage device, make sure the device has a single
partition and is formatted as FAT16 or FAT32.

2.

Connect the device to one of the USB host ports.

3.

If you connected a USB storage device to an LCD printer, select

Tools > USB

Menu

for more options.

Device

Description

Keyboard

Use a standard USB keyboard to send Fingerprint printer language commands
directly to the printer or to enter information if you are running a Smart Printing
application.

Bar code scanner

Use USB bar code scanners for data input with a Smart Printing application. The
printer also supports other USB scanners that use a generic keyboard driver.

USB storage
device

Use a USB storage device to load applications, configuration files, fonts, and
images into the printer memory, or to perform firmware upgrades. You can also
save configuration files to a USB storage device for upload to a printer. The USB
storage device must have a single partition and be formatted as FAT16 or
FAT32.

«
...
64
65
66
67
68
...
»

Summary of Contents for PX4ie













































































































Reviews:

No comments