manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 89 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 89

CHAPTER

6

PX4ie and PX6ie High Performance Printer User Guide

79

MAINTENANCE

Clean the Printer

To properly maintain the printer, you should clean it regularly. You can clean these 
parts of the printer:

•

The  printhead

•

The media guides

•

The exterior of the printer

Follow these guidelines for cleaning the printer:

•

Always remove the power cord before cleaning.

•

Never spray the printer with water. Protect it from water when cleaning the 
premises.

Clean the Exterior of the Printer

Clean the exterior of the printer as needed.

To clean the exterior of the printer:

Wipe external surfaces with a soft cloth slightly moistened with water or a mild 
detergent.

Caution:  To avoid possible personal injury or damage to the printer, never 

insert any pointed or sharp objects into the printer.

Caution:  Use only the cleaning agents specified in this section. 

Honeywell is not responsible for damage caused by any other 
cleaning materials used on this printer.

Caution:  Isopropyl alcohol is a highly flammable, moderately toxic, and 

mildly irritating substance.

Summary of Contents for PX4ie













































































































Reviews:

No comments