manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 70 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 70

60

PX4ie and PX6ie High Performance Printer User Guide

Printer Webpage User Name and Password

You will be prompted for a user name and password. The default username is 

itadmin

 and the default password is 

pass

.

Configure the Printer from the Web Page

If you are using Ethernet or WiFi communications, you can change configuration 
settings from the web page of the printer. Connect the printer to your network and 
obtain an IP address.

1.

Open a web browser on your PC.

2.

In the address bar, type the IP address of your printer and press 

Enter

. The 

printer web page appears.

3.

Click 

Login

. The Login page appears.

4.

Type your Username and Password and then click 

Login

. The default value for 

Username is 

itadmin

 and the default value for Password is 

pass

.

5.

Click 

Configure

. The Configuration Summary page appears.

6.

To see a complete list of printer settings, click 

Configuration Summary

.

7.

To configure printer settings, click an item in the navigation pane:

•

For serial, Ethernet, or Wireless 802.11, click 

Communications

.

•

For media or print quality settings, click 

Printing

.

•

For display, audio, service, and general settings, or maintenance alert 
message triggers click 

System Settings

.

•

To set conditions that trigger error, warning, and information alert 
messages, click 

Alerts

.

•

For network-related settings (such as DNS, WINS, Net1), for web and email 
server information, or if you are using a network management application, 
click 

Network Services

.

8.

Make any changes to the settings you want to configure.

9.

To save your changes, click 

Save

.

10. To reset all parameters on the page to the default settings, click 

Default 

Settings

.

Configure the Printer with PrintSet 5 

You can use PrintSet 5 to change configuration settings on your printer. 

You can download Honeywell applications to extend the capabilities of the printer. 
You may need to purchase a license to run some applications. To learn more about, 
licenses and other Honeywell software solutions, go to 

www.honeywellaidc.com

 > 

Browse Products

 > 

Software

.

Summary of Contents for PX4ie













































































































Reviews:

No comments