manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 17 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 17

PX4ie and PX6ie High Performance Printer User Guide

7

Fingerprint

Fingerprint is a BASIC-inspired general purpose printer language. Use Fingerprint 
to design custom label formats and write printer application software. If you plan 
to run Smart Printing applications directly on the printer, without connecting to a 
PC, select Fingerprint as your printer command language. 

Fingerprint is the default printer command language.

Intermec Printer Language (IPL)

IPL is a host-based printer command language. Use IPL to design, modify, and 
download label formats; write printer application software; and configure the 
printer. If you are sending IPL label files to the printer, select IPL as your printer 
command language. 

ZPL Command Language Simulator (ZSim)

The ZPL command language interprets Zebra™ programs (ZPL II or later) without 
requiring any host programming changes. If you are sending ZPL label files to the 
printer, select ZSim as your printer command language. 

Datamax Programming Language (DPL)

The DPL command language interprets Datamax™ data streams without requiring 
any host programming changes. If you are sending DPL label files to the printer, 
select DPL as your printer command language. 

Smart Printing (C#)

Smart Printing refers to the ability of the printer to independently run printing 
operations without being connected to a host computer. If you are running 
printer-based applications written in C#, select Smart Printing as your printer 
command language.

Set the Printer Command Language 

Use one of these methods to change the printer command language:

•

Main Menu

•

Printer  Web  Page

•

PrintSet 5

Summary of Contents for PX4ie













































































































Reviews:

No comments