manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 60 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 60

50

PX4ie and PX6ie High Performance Printer User Guide

12. Close the front door and media cover.

Connect the Printer to Power

The first time you turn on the printer, the Startup Window appears.

1. Connect one end of the power cord to the back of the printer and connect the 

other end to AC power.

2. Press the power switch. When the printer starts, a progress bar appears on the 

screen, and then the Startup Wizard appears.

3. Follow the instructions to configure basic printer settings.

4. Run another wizard to configure more printer settings, or go to the Ready 

screen.
If a condition occurs that will prevent printing, the Ready-to-Work indicator 
blinks.

About Smart Calibration 

Smart Calibration detects media type (gap, black mark, or continuous), detects 
printing method (ribbon or no-ribbon), and calibrates media length. This feature 
reduces the amount of media needed to set up the printer. Smart Calibration is 
available as an option for these media settings:

•

Power Up Action (default setting)

•

Head Down Action (default setting)

•

Hold Feed Button

Summary of Contents for PX4ie













































































































Reviews:

No comments