manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 63 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 63

CHAPTER

3

PX4ie and PX6ie High Performance Printer User Guide

53

CONNECT THE PRINTER

This section contains information about connecting the printer to a PC or to a 
network. Use the Printer Webpage or the Main Menu to configure the settings.

Connect the Printer to Your PC

You can connect the printer to your PC using one of the following methods.

Connect the Printer Using a Serial Cable

You can use a serial connection to communicate with your PC and send commands 
directly to the printer through a terminal connection.

1.

Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer 
and connect the other end to a serial COM port on your PC.

2.

If necessary, change the PC serial port configuration to match your printer.

Connect the Printer Using a USB Cable

Connect only one printer to your PC, either directly or through a hub. You do not 
need to set up any parameters for USB communications.

1.

Download and install the InterDriver software on your PC (see 

Install Printer 

Drivers

).

2.

When prompted, connect one end of the USB Type A cable to the back of the 
printer and connect the other end to your PC.

Connect the Printer to Your Network

These network interfaces provide features such as security, FTP server, web page, 
and Alert handling.

Summary of Contents for PX4ie













































































































Reviews:

No comments