manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 21 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 21

CHAPTER

2

PX4ie and PX6ie High Performance Printer User Guide

11

SET UP THE PRINTER

About the Media

The PX4ie and PX6ie can print on labels, tickets, tags, and continuous stock in var-
ious forms. The method you use to load media depends on how you want the 
printer to operate. The PX4ie and PX6ie can print in these modes:

•

Tear-off  (straight-through)

•

Peel-off (self-strip)

•

Cut-off

•

Batch take-up

•

External supply

•

RFID

Loading Media for Tear-Off Printing

In tear-off, or straight-through, printing mode, you manually tear off the media 
against the printer’s tear bar. In tear-off mode, use these types of media: 

•

Non-adhesive continuous stock

•

Self-adhesive continuous stock with liner

•

Self-adhesive labels with liner

•

Tickets with gaps (gap stock), with or without perforations

•

Tickets with black marks (mark stock), with or without perforations

You can also install an optional label taken sensor so that the next  copy in the 
batch is not printed until the current copy is removed. 

Summary of Contents for PX4ie













































































































Reviews:

No comments