MORLEY-IAS
ZX Fire Alarm Control Panels
Page 54
Document No. 996-175-000-1, Revision 01
Commissioning Manual
14.1.3 Define Event Outputs
•
All output devices can have two system events directly assigned to them.
•
A relay style device will turn on if either of the assigned events occurs.
•
A sounder style device will turn on if the primary event occurs, (Shown as ‘Event-A’), or will pulse if
only the secondary event occurs (‘Shown as Event-B’).
•
The ‘Define outputs’ display option allows the events assignments to be inspected and changed if
required.
It strongly recommended that a PC be normally used to define events.
•
Press the ‘No’ key to terminate this display option.
15 Normal Operation
•
The panel is placed in its normal operating state by selecting ‘NORMAL OPERATION’ from page 1 of
the Commissioning menu. Press ‘3’ to select the function.
•
Once this is done the panel will perform a reset and then become fully active. The alphanumeric
display may prompt for entry of the time and date – enter the correct time and date as appropriate.
•
Refer to the User Manual for further information on the operation and functions available at User
Levels 1 and 2.
Remember to lock the memory.
If the memory lock switch is left in the open position for an extended period of time the panel will report a
‘CONFIG MEMORY’ fault. Refer to Section 8 for further information.
