Honeywell HTR62, Installation And Operating Manual

Page: 42 / 46

Rev 1.01 30 Document 900.0341
12/05
Specifications
Connector RCA (back panel input)
RCA (front panel output)
No video signal Auto detection, message displayed on the screen
VCR audio signal Hi Fi Mono
Audio recording Two heads, rotating One head, stationary
Output level -7 dBm, 10K
Ω
maximum -6 dBm into 600
Ω
, unbalanced
Signal to noise ratio 60 dB 40 dB
Frequency response 20 Hz to 20 kHz ± 3 dB 100 Hz to 8 kHz
Audio distortion Less than 0.5% Less than 3% (SP mode)
Connector RCA
Text overlay
Title Up to 20 characters, user selectable
Time and date Real time clock with battery backup
and automatic Daylight Saving Time
AM/PM format, three letters for month
Position Top or bottom of screen, independent
for each value, user selectable
Recorded signals
Number of inputs Five
Text Three characters per signal, user
selectable
Input level Active high (12 VDC) or active low
(0 VDC), user selectable
Input protection Reverse polarity protection, 600W
transient protection
Speed indicator
Range 0 to 255 MPH or KPH
Calibration method Direct: drive the bus one mile (or one
km)
Indirect: enter a calibration number
Note Specifications are subject to change without notice.
Specification (cont’d) Description