Rev 1.01
10
Document 900.0341
12/05
Installation
Figure 2-4
Enclosure Cover Installation
Your HTR62 unit is now ready to program. Proceed to
Chapter 3, System Setup
.
Upgrade Installation
This section explains how to upgrade an existing mobile video system (for example, a Silent
Witness SWS310 or SWS210) to an HTR62 system. You will require only a VCR to complete
the upgrade
Note
If the main wiring harness is not replaced when upgrading, trigger 5 may not
be available.
Disassembling the Existing System
To disassemble the existing system:
1.
Remove the enclosure cover:
a.
Unlock the access panel in the front of the enclosure cover.
b.
Slide the access panel to the right and remove it from the enclosure cover.
c.
Pull the enclosure cover towards you until it is free of the enclosure base.
2.
Make a note of the current system configuration settings:
a.
Power up the VCR.
Enclosure base (rear)
Lockable access panel
Enclosure cover
Side rails
Summary of Contents for HTR62
