Rev 1.01
24
Document 900.0341
12/05
System Operation
Operating the HTR62
Every time the HTR62 receives an ignition trigger (see
Lines 7 to 11
,
page 21
), the unit starts
a recording, subject to record delay and timer settings. When the ignition trigger is
removed, the recorder stops recording, subject to record delay and timer settings. You can
view recorded video by pressing PLAY on the remote control to enter Play mode.
Before you use Play mode the first time to view, familiarize yourself with the remote control
functions (see
Table 3-1
,
page 14
for an overview).
The following subsections describe basic system operations.
PLAY
Press this button once to stop the current VCR operation and play back the tape.
The light in the middle of the PLAY buttons flashes green while the VCR is in Auto
tracking mode. The light is steady green when the VCR has tracked the tape and
is playing correctly.
FF
(Fast Forward)
Press this button to advance the tape or to search forward.
Press the PLAY button to resume normal playback. The VCR slows down before
reaching the end of the tape. When it reaches the end, it automatically starts
rewinding the tape, if enabled (see
RECM Continuous recording loop
, page
20
).
TRACKING/AV SELECT
Use only when horizontal lines appear in the picture during playback.
REC
Not currently available.
VIDEO, AUDIO
Connect to monitor when programming or viewing tape.
Table 4-1
Front Panel VCR Controls
Controls (cont’d)
Function
Summary of Contents for HTR62
