Honeywell HTR62, Installation And Operating Manual

Page: 35 / 46

Rev 1.01 23 Document 900.0341
12/05
4
System Operation
This chapter describes how to use the front panel controls to operate the VCR. Figure 4-1
shows the location of the controls and Table 4-1 describes their function.
Figure 4-1 Front Panel VCR Controls
POWER STOP / EJECT REW PLAY FF TRACKING
A/V SELECT
REC VIDEO AUDIO
L R
CST IN
DEW
HI-FI
Sensor
Table 4-1 Front Panel VCR Controls
Controls Function
Sensor Receives infrared signals from the remote control unit.
POWER Turns the VCR on. It automatically turns off after one minute of inactivity.
Use this button for temporary power to program the unit or to change VCR tapes
without turning the vehicle ignition on. The VCR remains powered on for one
minute after the last remote control button has been pressed.
CST IN If lit, indicates a video cassette is in the VCR.
DEW/HI FI (Stereo) If lit, indicates that audio is recording on the tape.
STOP/EJECT Press this button once to stop the current VCR operation. Press this button a
second time to eject the tape.
REW Press this button once to rewind the tape or to search through the images from the
most current image backwards.
Press the PLAY button to resume normal playback. The VCR slows down before
reaching the beginning of the tape. When it reaches the beginning, it automatically
starts recording in a loop, if enabled (see
RECM Continuous recording loop , page
20 ).