Honeywell HD54IP, User Manual

Page: 59 / 84

Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Document 800-09311V3 Rev A 59
07/2013
White Balance
White Balance ensures that color integrity is maintained in the camera image by
compensating for the temperature color “casts” that different light sources can cause. Use
Table 4-7 to set up White Balance options.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply .
Detect Time 5–60 seconds Sets the time ( 5 – 60 seconds) before the camera switches to Day or
Night mode after detecting a low-light condition or a normal light
condition, respectively.
Day/Night must be set to Auto .
DayToNight 1–7 Determines the low light detection level ( 1 – 7 ) when the camera
switches to Night mode. The lower the value, the darker the lighting
conditions before the camera switches.
Day/Night must be set to Auto .
Note The DayToNight threshold level must be set at least 2 less than
the NightToDay threshold setting.
Note The DayToNight threshold range is decreased if the AGC level
is reduced.
NightToDay 3–9 Determines the low light detection level ( 3 – 9 ) when the camera
switches to Day mode. The higher the value, the brighter the lighting
conditions before the camera switches.
Day/Night must be set to Auto .
Note The NightToDay threshold range is decreased if the AGC level
is reduced.
Table 4-6 Auto Exposure Settings (cont’d)
Setting Options Description
Table 4-7 White Balance Settings
Option Description
AWC Auto (Auto White
Balance Control Mode) An automatic white balance mode that can be used in
scenes which do not have constant lighting. The user can
optimize WB for the given scene by pressing and holding an
adjustment button.