Honeywell HD54IP, User Manual

Page: 47 / 84

Performance Series Rugged Day/Night H.264 IP Dome Camera User Guide
Document 800-09311V3 Rev A 47
07/2013
6. Click Launch Browser (see Figure 4-1 ) to go to the web client log on page.
Figure 4-1 Launching the Web Client from the IP Utility
Note If the Launch Browser button is inactive, then you must enable Enable HTTP
Server . Select the Enable HTTP Server check box, and then click Apply .
The Launch Browser button should then be enabled.
Logging Onto the Web Client from Internet Explorer
1. From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the log on window.
The
web client log on page opens.
Connect to the device then click
Launch Browser
Enable HTTP
Server
must be
enabled. If it isn’t,
the
Launch
Browser button
might not be
available.