Honeywell FUSION STREAMER, User Manual

Page: 57 / 70

8–3
8.2.2 PTZ SETUP
Pan / Tilt Setup allows you to set the PTZ Protocol for your PTZ enabled camera and configure settings such as travel
speed, dwell time, Port Settings, and Address Settings.
1 Use PTZ Enables or disables PTZ control.
2 Preset Set, Clear, and Create Presets and Preset Sequences. (Note: Most preset sequences
are controlled by dome)
3 Swing This option enables the Horizontal (Pan) or Vertical (Tilt) ‘Guard Tours’. (Note: Only
available in with certain domes/protocols)
4 Port Setting Defines the specific settings to transmit to the PTZ data.
5 Address Setting PTZ driver address must match that of the dome. Rx address only used on select dome
cameras.
Pan Speed Increases or decreases the Pan speed.
Tilt Speed Increases or decreases the Tilt speed.
Zoom Speed Increases or decreases the Zoom speed.
6
Focus Speed Increases or decreases the Focus speed.
7 On Screen Control Provides on screen control of a PTZ camera using the mouse.
8 Pan/Tilt Type Selects the protocol to use for the selected camera. The protocol is the unique set of
instructions that allows the Fusion Streamer to communicate with the PTZ camera.