Honeywell FUSION STREAMER User Manual Download Page 32 | Manualshive

Page: 32 / 70

background image

4–4

4

Power the Fusion Streamer off and then back on. Follow the instructions in Section 4.1 for connecting for the 1st time.

CAUTION: Any remote computers recording or receiving video data from the Fusion Streamer will lose their connection
when the unit is shut down.

4.8 UPGRADING THE VIDEO SERVER

Keeping your Streamer Software upgraded is important, this ensures that the Streamer Unit is operating at its peak
performance at all times. There are three basic ways to upgrade your Streamers Kernel, Server, and/or Web Viewer,
via the VSFinder software, the VSRemote software, or via the Web Viewer software.
Note: When upgrading the Kernel Module, the Streamer Unit may pause, this is a normal process.

1 VSFINDER

(OPTION)

1. Run VSFinder

2. Select a Network Adapter and click OK

3. Click Find

4. Select the desired video server and either click Upgrade or Upgrade All

5. Select the Upgrade you wish to do, Kernnel, Server, and/or WebViewer and click Browse

6. Find the upgrade file and click Open

7. Click Upgrade

8. Click OK

2

VSREMOTE and WEBVIEWER (OPTION)

1. Run the Fusion Remote Software or Connect to your Streamer unit via WebViewer

2. Click the Setup Button

3. Click the VS Site Information Tab

4. To select the desired upgrade file (Kernel, Server, Web Viewer), use the browse button to locate updated .rom files
on the local PC
Note: Kernel Server and Web Viewer must be updated independently

5. Click the Upgrade button

6. Reboot the Streamer unit by clicking the Reboot Server button

7. Click the Close button to exit

«
...
30
31
32
33
34
...
»

Summary of Contents for FUSION STREAMER







































































Reviews:

No comments

Related manuals for FUSION STREAMER

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 5

Brand: Data Translation Pages: 98

Brand: F5 Pages: 2

Brand: F5 Pages: 90

Brand: F5 Pages: 47

Brand: IBM Pages: 32

Brand: Observint Pages: 117

Brand: Analog Devices Pages: 76

RabbitCore RCM4400W

Brand: Rabbit Pages: 126

ControlPoint 2000

Brand: 4Home Pages: 20

UM10301 PCA8565

Brand: NXP Semiconductors Pages: 54

Brand: Billion Pages: 120

Brand: Freescale Semiconductor Pages: 8

NVRx-7300 series

Brand: Swann Pages: 9

Brand: iGateWeb.com Pages: 6

Brand: Axis Pages: 98

Vocal Performer VE-20

Brand: Boss Pages: 20

Brand: ADTRAN Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands