Honeywell Dolphin 7900 User Manual Download Page 98

Page: 98 / 204

8 - 14

Rev F

10/16/07

Dolphin® 7900 User’s Guide

Help Menu

Tapping Help opens the help menu. Select Online Help to access online help. Select About to review software version
information.

Status Bar

The status bar at the bottom of the main screen indicates the connection status between the network card and the AP.

The status bar displays one of the following depending on the status of connectivity:

•

“Not Associated”

•

“AP : [Name of the SSID] MAC : [MAC address].”

Port Menu

On the main screen, tapping on a port opens a popup menu that allows the port to be enabled or disabled, configured, or deleted.

Each entry is listed sequentially with a time stamp and a
text message.
Tap Refresh to query the log again.
Tap Close to return to the main screen.

Menu Item

Description

Status Bar

Summary of Contents for Dolphin 7900













































































































































































































Search results

Summary of Contents for Dolphin 7900

Reviews:

Brands by name

Popular brands

Honeywell Dolphin 7900, User Manual

Search results

Summary of Contents for Dolphin 7900

Reviews:

Brands by name

Popular brands