manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 109

Dolphin® 7900 User’s Guide

 Rev F

10/16/07

8 - 25

Installing Certificates with CertAdd

Certificate Requirements

During configuration, you may have specified one or two certificates to use during the authentication process. The specified 
identity should match the Issued to field in the certificate and should be registered on the authentication server (i.e., RADIUS 
server) that is used by the authenticator. In addition, your certificate must be valid on the authentication server. This requirement 
depends on the authentication server and generally means that the authentication server must know the issuer of your certificate 
as a trusted Certificate Authority (CA). 

If the selected certificate does require a password or pass phrase to decode the private key, enter this value in the “Certificate 
Pass Phrase” field. This value will be encrypted when the configuration is saved. However, on some systems, there may not be 
a certificate. If that is the case, you can use the section below as a primer on OS X certificate management.

About CertAdd

CertAdd is a standalone utility that allows certificates to be selected and installed on a Windows Mobile device.   

Installing Certificates

Client or CA certificates can be imported from *.cer (same as *.der), *.p7b, or *.pfx files.

1. Download the certificate file to the My Documents folder. The location isn’t critical, although you may want to create a 

standard folder for consistency.

2. Go to Start > Programs > Meetinghouse Certificate Installer. All valid certificate file types located in the My Documents 

folder appear in the list. 

3. Tap and hold on a certificate in the list. A pop-up appears asking if you want to install the certificate.

4. Tap OK. The certificate is loaded into the correct certificate store.

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands