manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 12

1 - 4

Rev F

10/16/07

Dolphin® 7900 User’s Guide

RF Approvals for 802.11b and Bluetooth 

RF Approvals for GSM (MC-45, MC-46, & MC-75)

R&TTE Compliance Statement for 802.11b, Bluetooth, and/or GSM (MC-45, MC-46, & MC-75)

Dolphin 7900 RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC). This equipment 
has been assessed to the following standards as applicable:

This product is marked with 

 in accordance with the Class II product requirements specified in the R&TTE 

Directive, 1999/5/EC. 

The equipment is intended for use throughout the European Community. PAN European Frequency Range: 2.402–2.480 GHz.

Restrictions in France are as follows: 

•

Indoor use:  Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz 

•

Outdoor use:  Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band and maximum power (EIRP*) of 10 mW for 
the 2.454–2.483 GHz band

For European Community Users

Hand Held Products complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 
January 2003 on waste electrical and electronic equipment (WEEE).

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for its production. It may contain hazardous substances 
that could impact health and the environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, 
we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of 
the materials of the product you are disposing in a sound way.

 The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste 
and invites you to use the appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste 

administration.

You may also contact your supplier for more information on the environmental performances of this product.

Parameter

Specification

U.S.A.
Canada

FCC Part 15.247
RSS 210 

Parameter

Specification

U.S.A.
Canada

FCC Part 24
RSS 133

Parameter

Specification

R&TTE

EN 300 328-2:2000
EN 301 489-1 (2002-08)
EN 301 489-17 (2002-08)
EN 60950: 2000
EN 50361: 2001

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands