manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 191

Dolphin® 7900 User’s Guide 

Rev F

10/16/07

15 - 1

Overview

The Dolphin Mobile Base charging and communication cradle is designed specifically for in-premise and in-transit data collection 
applications. It features a flexible mounting bracket, a cigarette lighter adapter, and a power cable to adapt it to your environment. 

When a terminal is seated in the Mobile Base, its main battery pack charges in less than four hours. The serial connector supports 
RS-232 communication and power out to peripheral devices, such as hand held scanners.

As the hub of your mobile data collection system, the Mobile Base performs three important functions: charging, communications, 
and storage.

Charging

The Mobile Base completes a full charge of the main battery pack in less than four hours. The Mobile Base also 
provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has 
been achieved and switches to a trickle charge to prevent over- and undercharging. 

Communications

The Mobile Base transmits data at speeds of up to 115K baud via its RS-232 serial port.

Convenient Storage 

Intelligent battery charging makes the Mobile Base a safe and convenient storage receptacle for your Dolphin 
terminal. 

Capacity

The Mobile Base holds one terminal.

Use only the peripherals, power cables, and power adapters from Hand Held Products. Use of peripherals, cables, or 
power adapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.

Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by 
Hand Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or 
battery.

!

!

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands