manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 162

11 - 4

Rev F

10/16/07

Dolphin® 7900 User’s Guide

Suspend/Resume with GPS

When the terminal goes into suspend mode, power is removed from the GPS module. There are two ways to control the Suspend/
Resume activity of the terminal: via the keyboard or via activity timeout.

Suspend Via Keyboard Combination

Press Blue 

 + Backlight 

 keys.

Suspend Via Activity timeout

Dolphin terminals suspend when the device is inactive for a programmed period of time. The period of time is set in the Power 
System Setting; see 

Power

 on page 

6-11.

 A GPS application can prevent this suspend by calls to SystemIdleTimerReset(). 

To determine the frequency to use to call SystemIdleTimerReset(), retrieve the following registry key: 

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power

This function must be used appropriately! Keep in mind that a program that never suspends (or sleeps) by continually 
calling SystemIdleTimerReset() quickly drains the battery. 

Note: For complete instructions about Suspend/Resume in general, see 

Resetting the Terminal

 on page 

2-11.

Time to First Fix (TTFF)

The duration of time spent in suspend mode affects the time it takes to acquire a positional fix when the terminal resumes normal 
operations. This is known as “Time To First Fix” (TTFF).

Note: When the terminal boots up for the first time from the factory, TTFF can take up to 15 minutes.

Typical TTFF From No Satellite Data

The terminal stops acquiring GPS data when 

1. The terminal goes into suspend mode, which can happen manually or due to device inactivity. 

GPS data acquisition begins again when the terminal resumes normal operation. You have to wake the terminal manually 
by pressing the Scan key. For more information, see 

Resetting the Terminal

 on page 

2-11.

2. The terminal moves to a location where it cannot receive satellite signals; inside a building that blocks satellite reception, for 

example. 

Typical TTFF 

Type of Start

Start Description

Typical TTFF

Cold Start

No satellite data has been received for 16 hours

80 seconds

Warm Start 

No satellite data has been received for 30 minutes 

35 seconds

Hot Start 

No satellite data has been received for 15 minutes

10 seconds

!

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands