manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 159

Dolphin® 7900 User’s Guide 

Rev F

10/16/07

11 - 1

Dolphin 7900 with GPS

Overview

GPS functionality can be integrated into certain Dolphin 7900 terminals with GSM/GPRS. There’s no need to carry multiple 
devices to get the job done because the 7900 integrates into one device powerful mobile computing, wireless full-area voice and 
data communications, and advanced GPS functionality. 

GPS Functionality

The integrated GPS technology allows location tracking of workers and vehicles, providing better utilization of field assets. 
Optional mapping and navigation software provides turn-by-turn driving directions and location information, allowing workers to 
arrive on time.

Dolphin 7900 with GPS Configuration

Dolphin 7900s with GPS feature the following configuration:

•

802.11 WLAN radio

•

GSM/GPRS Quadband radio

•

Bluetooth radio

•

5300SR with laser aimer

•

36-key keyboard

•

128MB RAM and 128MB Flash

•

Color display

•

Windows Mobile 5.0 operating system

11

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands