manualshive.com logo in svg

Honeywell Dolphin 7900, User Manual

Share
Download
Honeywell Dolphin 7900 User Manual Download Page 17

Dolphin® 7900 User’s Guide

 Rev F

10/16/07

2 - 3

Dolphin 7900 Series Peripherals 

Each of the following items is sold separately to enhance your Dolphin 7900 terminal’s capabilities. 

Dolphin HomeBase

™

The Dolphin HomeBase charging and communication cradle supports both RS-232 and USB communications, which enable it 
to interface with the majority of PC-based enterprise systems. When a terminal is seated in the HomeBase, its main battery pack 
charges in less than four hours. In addition, the HomeBase contains an auxiliary battery well that charges a spare Li-ion battery. 

For more information, see 

Dolphin HomeBase

 on page 

13-1.

Dolphin Mobile Base

™

 

The Dolphin Mobile Base charging and communication cradle is designed specifically for in-premise and in-transit data collection 
applications. It features a flexible mounting bracket, a cigarette lighter adapter or power cable to adapt it to your environment. 

When a terminal is seated in the Mobile Base, its main battery pack charges in less than four hours. The serial connector supports 
RS-232 communication and power out to peripheral devices, such as hand held scanners.

For more information, see 

Dolphin Mobile Base

 on page 

15-1.

Dolphin QuadCharger

™

 

The Dolphin QuadCharger is a four-slot charging station for Dolphin Li-ion battery packs that can charge each battery in less than 
four hours. The fourth slot features a battery analyzer that completely resets and re-calibrates a battery, then displays remaining 
capacity.

For more information, see 

Dolphin QuadCharger

 on page 

12-1.

 

Dolphin ChargeBase

The Dolphin ChargeBase is a four-slot charging cradle that holds, powers, and charges a terminal in each slot.

For more information, see 

Dolphin ChargeBase

 on page 

14-1.

Dolphin Net Base

The Dolphin Net Base is a four-slot charging/communication cradle that holds, powers, charges, and communicates with the 
terminal in each slot. Ethernet communication occurs via statically and dynamically-assigned IP addresses. 

For more information about the Dolphin Net Base, please consult the Dolphin 7900 Net Base Quick Start Guide. 

Summary of Contents for Dolphin 7900













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands