COMPONENT MAINTENANCE MANUAL
00001059
TASK 21-22-91-100-802-A01
2.
Cleaning of a Sub-Assembly
A.
Reason for the Job
WARNING:
– DO NOT BREATHE THE FUMES. THE SOLVENTS ARE DANGEROUS.
– USE EYE PROTECTION. DO NOT LET THE SOLVENTS TOUCH YOUR SKIN.
– CLEAN THE PARTS IN A ROOM WHERE AIRFLOW IS SUFFICIENT.
– DO NOT CLEAN NEAR AN OPEN FLAME.
CAUTION:
– CAREFULLY OBEY THE CLEANING PROCEDURES, OR REPLACE THEM WITH
A PROCEDURE WHICH IS SPECIFIED BY THE MANUFACTURER IF YOU USE
EQUIVALENT PRODUCTS.
– AFTER YOU COMPLETE THE PROCEDURE, YOU MUST PUT PROTECTIVE
CAPS OR APPLICABLE PACKAGING MATERIAL ON THE PARTS.
Self Explanatory
B.
Job Set-up Information
(1)
Referenced Information
REFERENCE
PAGE
BLOCK
DESIGNATION
TASK-21-22-91-100-804-A01
4000
CLEANING METHOD TABLE
C.
Job Set-up
Not applicable
D.
Procedure
SUBTASK 21-22-91-160-002-A01
(1)
Cleaning of the Sub-Assembly
(a)
Refer to the Cleaning Method Table (Ref. TASK 21-22-91-100-804-A01): do the
procedure which is given for the most easily damaged part.
E.
Close-up
Not applicable
21-22-91
Page 4002
Dec 15/06
The document reference is online, please check the correspondence between the online documentation and the printed version.