Honda HSS1380, Owner'S Manual

Page: 53 / 330

50
If removal is difficult due to object incrimination, rotate the auger in
the reverse direction for easy removal.
Connect the spark plug cap securely.
Start the engine.
Squeeze the snow discharge clutch lever and rotate the auger, then
make sure that the auger-lock indicator remains off.
Squeeze the drive clutch lever and do normal snow discharging.
The system is in abnormal condition, when the auger-lock indicator
blinks even if the engine stopping due to object incrimination or
other similar cause is not done, while snow discharging.
In this case, turn the engine switch to ‘‘OFF’’ position, pull out the
key and consult your dealer.
The auger-lock indicator remains on when the engine switch is not
turned to ‘‘OFF’’ position and the engine started again even if an
object is removed.
In this case, turn the engine switch to ‘‘OFF’’ position, then start the
engine again.
The battery capacity may be lowered when the trouble is not found
in the auger and engine is stopped.
In this case, charge the battery (page
) or replace it.
The system is in abnormal condition, if the auger-lock indicator
blinks when squeezing the snow discharge clutch lever, after
removing an object and starting the engine again.
In this case, turn the engine switch to ‘‘OFF’’ position, pull out the
key and consult your dealer.
5.
6.
7.
8.
71