Honda HSM1336i, Owner'S Manual

Page: 59 / 144

57
OPERATION
3b. Clearing in POWER mode
With the mode selector switch in the POWER position you can
adjust the engine speed and snow discharge distance. Use the
throttle control lever to adjust the engine speed, which determines
how fast snow is picked up and how far it is thrown. Use the chute
control switch to adjust height and direction of the snow discharge.
• Note that the throttle control lever only functions after the auger
is turning. The engine speed is maintained automatically in
POWER mode (see page 21).
1) Set the throttle control lever in the
third position from the bottom.
2) Operate the chute control switch to
adjust the snow discharge direction
and angle (see page 27).
3) Operate the auger housing control
switch to adjust the auger to be
parallel to the road surface (see
pages 50 and 52).
USA model only:
• You can return the auger to the
initial position by pushing the
reset switch.
• If you return the auger to the initial
position by pushing the reset
switch, the auger can hit against the
road surface or can be raised from
the road, resulting in some snow
left on the ground, depending on
the road condition and the position
of the snow blower.
Adjust the auger height position
as needed.
THROTTLE CONTROL LEVER
3rd
POWER mode
CHUTE CONTROL SWITCH
RESET SWITCH
(USA model only)
AUGER HOUSING
CONTROL SWITCH
31V15621.book 57 ページ ２０１８年１０月１０日 水曜日 午前１１時４分